The essential clarity of Multi-wall Polycarbonate Sheeting can only be retained if care is taken to exclude all dust particles, insects and moisture.
Contamination by dust and moisture will soon lead to the growth of unsightly algae and moulds. The best protection is the use of a quality breather tape which allows full ventilation of all sections and channels of the Polycarbonate Sheeting.
Many designs of polycarbonate sheeting are now available and more complex sections are being developed. However, FILTA-FLO will fit and fully ventilate all sizes and designs of sheets including those with very small internal sections.
Products
Code: RA1710
25mm wide FILTAflo Anti Dust Tape to suit 10mm thick polycarbonate sheeting.
Hot Melt Adhesive with U.V inhibitor
Code: RA1712
30mm wide FILTAflo Anti Dust Tape to suit 12mm thick polycarbonate sheeting.
Hot Melt Adhesive with U.V inhibitor
Code: RA1716
38mm wide FILTAflo Anti Dust Tape to suit 16mm thick polycarbonate sheeting.
Hot Melt Adhesive with U.V inhibitor
Code: RA1725
45mm wide FILTAflo Anti Dust Tape to suit 25mm thick polycarbonate sheeting.
Hot Melt Adhesive with U.V inhibitor
Code: RA1728
50mm wide FILTAflo Anti Dust Tape to suit 28mm thick polycarbonate sheeting.
Hot Melt Adhesive with U.V inhibitor
Code: RA1735
60mm wide FILTAflo Anti Dust Tape to suit 35mm thick polycarbonate sheeting.
Hot Melt Adhesive with U.V inhibitor
Code: RA1740
70mm wide FILTAflo Anti Dust Tape to suit 40mm thick polycarbonate sheeting.
Hot Melt Adhesive with U.V inhibitor